Recommend this page to a friend! |
Download |
Info | Example | Files | Install with Composer | Download | Reputation | Support forum | Blog | Links |
Ratings | Unique User Downloads | Download Rankings | ||||
61% | Total: 199 | All time: 8,492 This week: 206 |
Version | License | PHP version | Categories | |||
binarystream 1.0.3 | BSD License | 5 | PHP 5, Files and Folders, Parsers |
Description | Author | |||
This class can parse extract data from binary files. Innovation Award
|
#!/usr/bin/php |
BinaryStream - a handy tool for working with binary data and the best replacement for pack()/unpack() with big list of features.
If you are looking for a convenient tool that would allow read and write binary data (whether existing or created by you format), you choose the correct library.
_BinaryStream_ - is a powerful tool for reading and writing binary files. It supports a variety of high-level data types and sometimes lets you forget that you are working with unstructured binary data.
With BinaryStream you can handle network packets, binary files, system protocols and other low-level data.
Why it's objectively better pack/unpack? - 64 bit int's/float's - selection of byte-order of float's - rare, but possible int's size (24, 40, 48, 56) - other features like data groups and configurations ...
And that's all with PHP 5.3.
The easiest way to use BinaryStream - this:
use wapmorgan\BinaryStream\BinaryStream;
$stream = new BinaryStream('filename.ext');
$text = $s->readString(20);
This example reads 20 bytes at the beginning of the file as a string.
A more complex example, where the data were located in the following order: - integer (int, 32 bit) - float (float, 32 bit) - flag byte (where each bit has its own value, 8 bits): first bit determines whether there after this byte written another data, 5-bit empty, and the last 2 bits of the data type:
- `0b00` - after this data recorded 1 character (char, 8 bits)
- `0b01` - after this data recorded 10 characters (string, 10 bytes)
- `0b10` - after this data time in unixtime format packaged in long integer (long, 64 bits)
- `0b11` - not used at this moment.
In order to read these data and those that depend on the flags, this example is suitable:
use wapmorgan\BinaryStream\BinaryStream;
$stream = new BinaryStream('filename.ext');
$int = $stream->readInteger(32);
$float = $stream->readFloat(32);
$flags = $stream->readBits([
'additional_data' => 1,
'_' => 5, // pointless data
'data_type' => 2,
]);
if ($flags['additional_data']) {
if ($flags['data_type'] == 0b00)
$char = $stream->readChar();
else if ($flags['data_type'] == 0b01)
$string = $stream->readString(10);
else if ($flags['data_type'] == 0b10)
$time = date('r', $stream->readInteger(64));
}
In this example, we read the basic data and the additional, based on the value of flags.
But it is unlikely to be so few data. For added convenience, you can use a group reading function. The previous example can be rewritten as follows:
use wapmorgan\BinaryStream\BinaryStream;
$stream = new BinaryStream('filename.ext');
$data = $stream->readGroup([
'i:int' => 32,
'f:float' => 32,
'additional_data' => 1,
'_' => 5,
'data_type' => 2,
]);
if ($data['additional_data']) {
if ($data['data_type'] == 0b00)
$data['char'] = $stream->readChar();
else if ($data['data_type'] == 0b01)
$data['string'] = $stream->readString(10);
else if ($data['data_type'] == 0b10)
$data['time'] = date('r', $stream->readInteger(64));
}
If you are reading a file in which such groups of data are repeated, you can save a group with a name, and then simply refer to it to read the next data. Let us introduce one more value for data_type: 0b11
- means that this is the last group of data in the file. An example would be:
use wapmorgan\BinaryStream\BinaryStream;
$stream = new BinaryStream('filename.ext');
$stream->saveGroup('Data', [
'i:int' => 32,
'f:float' => 32,
'additional_data' => 1,
'_' => 5,
'data_type' => 2,
]);
do {
$data = $stream->readGroup('Data');
// Some operations with data
} while ($data['data_type'] != 0b11);
And now imagine that we have moved to a new file format that is different from the previous one and has a certain mark in the beginning of the file, which will help to distinguish the new from the old format. For example, a new label is a sequence of characters 'A', 'S', 'C'
. We need to check the label and if it is present, parse the file according to another scheme, and if it does not, use the old version of the processor. An example to illustrate this:
use wapmorgan\BinaryStream\BinaryStream;
$stream = new BinaryStream('filename.ext');
if ($stream->compare(3, 'ASC')) {
// parse here new format
} else {
$stream->saveGroup('DataOld', [
'i:int' => 32,
'f:float' => 32,
'additional_data' => 1,
'_' => 5,
'data_type' => 2,
]);
do {
$data = $stream->readGroup('DataOld');
// Some operations with data
} while ($data['data_type'] != 0b11);
}
Installation via composer:
composer require wapmorgan/binary-stream
All used data types are presented in the following table:
| Type | Dimensions | Values range | Notes |
|---------|-----------------|---------------------------------------------------------|-------|
| integer | 8/16/32/64 bits | 0 to 255/65 535/4 294 967 295/9 223 372 036 854 775 807 | Also, there's support for non-standard sizes like 24, 40, 48 and 56 bits. |
| float | 32/64 bits | 0 to 3.4 x 10^38/1.798 x 10^308 | Also, there's support for choosing byte-order when storing a float (unlike pack()
). |
| char | 1 byte | From 0 to 255 ascii chars | - |
| string | [n] of bytes | ... | - |
| bit | [n] of bits | 0 or 1 | Also, there's support for combining few consecutive bits in one value. |
Reading data is possible using specialized methods for each data type: - bit: - `readBit(): boolean`
Example: `$flag = $s->readBit();` - `readBits(array $listOfBits): array of boolean and integers`.
Example: `$flags = $s->readBits(['a' => 2, '_' => 5, 'b' => 3]);` If size of field (an array element value is `1`, then this field will have `true/false`, if larger 1, then `N` consecutive bits will be combined in an `integer`.) - char: - `readChar(): string(1)`
Example: `$char = $s->readChar();` - `readChars($count): array of string(1)`
Example: `$chars = $s->readChars(4);` - integer - `readInteger($sizeInBits = 32): integer`
Example: `$int = $s->readInteger(32);` It supports the following dimensions: 8, 16, 32, 64 and 24, 40, 48, 56 bits. - float: - `readFloat($sizeInBits = 32): float`
Example: `$float = $s->readFloat(32);` It supports the following dimensions: 32, 64 bits. - string: - `readString($length): string($length)`
Example: `$string = $s->readString(10);`
You can save list of fields definitions with a specific name and use it's name when you need to read the same block few times. A group is defined by group configuration - list of fields, their type and size. To compose group configuration create an array: keys define type and name of fields, values - their size: - key is a name of field and may contain type of field. To specify type prepend name with a type letter and a colon. Type letters:
- `b` - bit
- `i` - integer
- `f` - float
- `c` - char
- `s` - string
If type is not defined, field will be treated as a `bit`-field.
Example: `flag` - `bit`-field, `s:name` - `string`-field
value is a size or a dimension of field:
- If field has `integer`, `float` or `bit` type, it defines size of field in term of bits.
- If field has `char` or `string` type, it defines size in term of bytes.
Example:
'flags' => 16, // bits-field (16 bits = 2 bytes)
's:name' => 10, // string-field (80 bits = 10 bytes)
So full example of group configuration:
$group = [
'flags' => 16,
'i:date' => 32,
'f:summ' => 32,
's:name' => 10,
];
| Method | Usage | Notes |
|-----------------------------------------------|-------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| saveGroup($name, array $groupConfiguration)
| $s->saveGroup('data', ['i:field' => 32, 's:text' => 20]);
| Create new group with few fields. If group with that name already exists, it replaces original group. |
| readGroup($name)
| $data = $s->readGroup('data');
| It allows you to read data from pre-saved configuration. To save a group under a new name, use the method saveGroup($name, array $fields)
|
| readGroup(array $groupConfiguration)
| $data = $s->readGroup(['i:field' => 32, 's:text' => 20]);
| The fields are listed in the as array in which the keys determine the type and the name of the data fields, and values - dimension (understood as bytes for string and chars, and as bits for everything else). Supported: s
, c
, i
, f
and b
. If the type is not specified, the field is perceived as a bit (or a few bits). The type and name are separated by a colon (:). |
| Method | Usage | Notes |
|----------------|----------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------|
| go($offset)
| $stream->go(-128);
| It goes to the absolute position in the file. If you pass a negative value, the value of the cursor will be set to -$offset
bytes from the end of the file. |
| go($mark)
| $stream->go('FirstTag');
| It moves to the position where the $mark
mark has been set. |
| skip($bytes)
| $stream->skip(4);
| Skip the following $bytes
bytes. |
Current position testing:
isEnd(): boolean
Returns true if cursor is at the end of file.
| Method | Usage | Notes |
|------------------------------|------------------------------------------|--------------------------------------------------------------------|
| mark($name)
| $stream->mark('Tag');
| It saves the current cursor position under the $name
name. |
| markOffset($offset, $name)
| $stream->markOffset(-128, 'FirstTag');
| It saves specific position in file under the $name
name. |
| isMarked($name)
| $stream->isMarked('Tag');
| Check whether the $name
mark set. Returns true or false. |
Comparation of bytes:
compare($length, $bytes)
Compares `$length` bytes from current position with `$bytes`. Carrent position will not be changed. Returns true or false.
BinaryStream
treats int
's and long
's in little-endian format. To change the reading order of bytes use `setEndian($endian)` method with one of `BinaryStream` constants:
| Constant | Meaning |
|------------------------|--------------------------------------|
| BinaryStream::BIG
| Big-endian for integers and floats |
| BinaryStream::LITTLE
| Little-endian for integers and float |
| Method | Usage | Notes |
|----------------------------|---------------------------------------------------|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| loadConfiguration($file
| $stream->loadConfiguration('file_format.conf');
| Load configuration (byte order and data groups) from an external file. Configuration format - ini. To see an example of such a file, open the conf/mp3.conf file. |
| saveConfiguration($file)
| $stream->saveConfiguration('file_format.conf');
| Saves the current settings of byte order and all created data groups to an external file in ini-format. This configuration can be later restored from the file with the method loadConfiguration()
. |
If you are the one who needs to write data to binary files, you can use additional methods to do so.
Firstly, you need to open a file in one of the modes that allow writing of a file (by default, files are opened in read-only mode). For this when you create an object BinaryStream specify in second argument one of the following modes:
| Mode | Constant | Notes |
|------------|--------------------------|-------------------------------------------------------------------------------------------|
| Creation | BinaryStream::CREATE
| Creates new file. Fails when file already exists. |
| Recreation | BinaryStream::RECREATE
| Clears all file content and sets cursor at the beginning. Fails when file doesn't exist. |
| Rewriting | BinaryStream::REWRITE
| Opens file and sets cursor at the beginning. Fails when file doesn't exist. |
| Appending | BinaryStream::APPEND
| Opens file and sets cursor at the end. Fails when file doesn't exist. |
After you have correctly opened the file, you can use the following methods, named by analogy with the other designed for reading.
| Data type | Method | Example | Notes |
|---------------|---------------------------------------|---------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
| bit | writeBit($bit)
| $s->writeBit(true);
| |
| | writeBits(array $bits)
| $s->writeBits([true, false, [2, 2], [4, 10]]);
| You can combine multiple bits into a single number. To do this, instead of using an array of boolean, in which the first element is the number of bits is used to record the number, and the second element - number. |
| char | writeChar($char)
| $s->writeChar(32);
| You can pass a character (string), and the code for this symbol (an integer up to 256). |
| integer | writeInteger($integer, $sizeInBits)
| $s->writeInteger(256, 32);
| It supports the following dimensions: 8, 16, 32, 64 bits. |
| float | writeFloat($float, $sizeInBits)
| $s->writeFloat(123.123, 32);
| It supports the following dimensions: 32, 64 bits. |
| string | writeString($string)
| $s->writeString('Abracadabra');
| |
Files (11) |
File | Role | Description | ||
---|---|---|---|---|
bin (1 file) | ||||
conf (1 file) | ||||
src (1 file) | ||||
tests (4 files) | ||||
.travis.yml | Data | Auxiliary data | ||
composer.json | Data | Auxiliary data | ||
LICENSE | Lic. | License text | ||
README.md | Doc. | Documentation |
Files (11) | / | tests |
File | Role | Description |
---|---|---|
CompareTest.php | Class | Class source |
MarkTest.php | Class | Class source |
ReaderTest.php | Class | Class source |
WriterTest.php | Class | Class source |
The PHP Classes site has supported package installation using the Composer tool since 2013, as you may verify by reading this instructions page. |
Install with Composer |
Version Control | Unique User Downloads | Download Rankings | |||||||||||||||
100% |
|
|
User Ratings | User Comments (3) | |||||||||||||||||||||||||||||||
|
Applications that use this package |
If you know an application of this package, send a message to the author to add a link here.